• The Black & Decker GH3000 7.5 Amp 14 in. Curved Shaft Electric String Trimmer / Edger features lightweight, ergonomic design with adjustable height and pivoting handle that gives the user maximum control and comfort. The single 0.08 in. line and 14 in. cutting path deliver faster results even when trimming tough weeds and grass.

Features

• 7.5 amp motor delivers more power to the cutting string to tackle the toughest weeds, grass and overgrowth quickly
• Wheeled edge guide adds comfort and ease-of-use while edging a lawn around sidewalks and driveways
• Groom N’ Edge with quick latch release allows users to switch from trimming to edging in seconds

Includes

• 7.5 Amp 14 in. Curved Shaft Electric String Trimmer / Edger – GH3000
• Spool – SF-080
• Guard

Specifications

• Power Source: Corded
• Amperage: 7.5
• Wifi compatibility: No
• Case Included: No
• Bluetooth Compatibility: No
• Voltage: 120V

This content was originally published here.

This content was originally published here.

With Valentine’s day just around the corner, everyone’s focused on coming up with the most meaningful gift for their loved ones. That’s where the tricky part comes in, making the smartest purchase from a plethora of options. Well, look no further! We bring to you some amazingly affordable gift ideas. These products are

This content was originally published here.

“The compression spring is part of your impact drivers chuck assembly. The spring fits over the anvil shaft and applies tension to draw the chuck collar back after a bit is removed. Over time, the spring can fail. This will allow the collar to move freely which can cause the driver bit to come loose. Replacing the compression spring is a repair that you can do yourself and I’m going to explain you how.

Mark: Hi. I’m Mark Sodja. Do-it-yourself repairs like this are easier than you might think. From lawn machines to cordless drills, kitchen mixers, outdoor grills, our how-to articles walk you through each repair from start to finish so doing it yourself means never having to do it alone.

Let’s get started. Mark: I’ll begin by removing the hog ring from the chuck. The hog ring fits into a groove on the anvil and secures the chuck together. There’s a spring behind the hog ring so I want to be careful that I don’t lose all the parts when the hog ring is removed.

I’ll use a pick to remove it. Now I can replace the compression spring and place the plain washer over the top. Now install the hog ring. This is a little challenging because you have the compression spring trying to push everything away from the anvil. What I’ll do is take a small pair of needle-nose pliers and use them to compress the spring.

You’ll notice that the anvil is dog-eared and I’ve aligned the plyers with the dog ears on the anvil so I have some room to work around the spindle. I’ll place the hog ring over the spindle. That’s all it takes to replace the compression spring in your impact driver.

Mark: Be sure to check back often for new articles and expert advice. If you found this article helpful, give us a thumbs up and leave a comment.

The post DeWALT Impact Driver Repair – Replacing the Compression Spring (DeWALT Part # N019351) appeared first on Microwave Repairs.

This content was originally published here.

Mark Dewalt was an architect. For him, that meant several things—being a designer, problem solver, tinkerer, renovator, mentor and occasional mischief-maker.

A founding principal of the firm Valerio Dewalt Train, he was the “better call Mark” guy anytime a client or a project was in a tough spot.

There was the time Underwriters Laboratories needed a building in Northbrook for testing appliances. It had to have no electronic interference, so steel construction was bad. David Rasche, principal at Valerio Dewalt, recalled that Mr. Dewalt chatted up a swimming pool manufacturer and came up with a building that was all plastic above the foundation. He borrowed a design for recessed swimming pool lights to use in the building.

“He was the nicest guy in the room,” he said of Mr. Dewalt. “He was definitely a builder of teams. Whatever the problem was, he would find a way to get the parties together and fix it.” He did it with modesty, a quality not always found in architects with a name on the door, and good humor.

Working on a tight turnaround schedule for NBC, Mr. Dewalt led a team that produced a cantilevered skybooth that afforded a great view of the 1996 Democratic Convention in Chicago while announcing the network’s presence in no uncertain terms.

Going back 30 years, Mr. Dewalt handled many assignments for the Merchandise Mart, such as converting its first and second floors into public spaces. His work included the Art on the Mart feature of images projected onto the building’s river-facing façade. “I am not sure there is a floor or corner of that building that he didn’t touch,” Rasche said.

With Joseph Valerio, Mr. Dewalt designed the Ford Calumet Environmental Center, a bird-friendly building in Chicago’s Big Marsh Park that has its own wastewater wetlands system.

Mr. Dewalt died April 29 of heart failure at the age of 70. “He lived his life’s dreams,” which included having his own architectural firm and raising two educated and successful daughters, said his widow, Gail Dewalt. They would have shared their 44^th wedding anniversary Friday.

The couple lived in Oak Park for years, where Mr. Dewalt constantly had projects going around the house, and later moved to Westchester. Gail Dewalt recalled how, when they were a young couple, her husband figured out how to override the landlord’s 10 p.m. shutoff of the heating system. Years later, he would design an addition for the family’s getaway, a log cabin in Ellison Bay, Wisconsin, that was so true to the original the tax assessor had to be told what was old and what was new, Gail Dewalt said.

He had an elaborate model train set, with settings he worked on himself, photographing his miniature world to make it look like you were in the landscape. Rasche said he did a lot of that work at night. “I’m not sure he slept a lot,” he said.

Mr. Dewalt was born in Pittsburgh and came to the Chicago area as a boy when U.S. Steel transferred his father here. Gail Dewalt said the family settled in Naperville when farms and fields still surrounded it.

She said Mr. Dewalt’s mother always suspected her son was destined for architecture and design. His mother used to tell how, as a toddler, Mr. Dewalt once wanted a waffle but didn’t know the word, so he drew a picture of a waffle.

He earned his architecture degree at what’s now the University of Illinois Chicago. He co-founded a firm with Jack Train in 1984 and, 10 years later, a merger made it Valerio Dewalt Train. He retired in November 2019.

Asked for Mr. Dewalt’s overriding precept as an architect, Rasche said, “It was probably this: We take our work very seriously. We don’t take ourselves too seriously.”

Mr. Dewalt enjoyed the occasional workplace prank, even when he came back from vacation to find his office filled with balloons, Rasche said. He said Mr. Dewalt got him back by walling Rasche’s office shut, using a partition that looked solid but was easily breached.

It might have been a playful reminder that Mr. Dewalt’s door was always open. “He was always mentoring people. He really brought along a lot of people in this firm, including me,” said Rasche, who has worked with him since 1990.

Other works of Mr. Dewalt included the performance pavilion at Northerly Island, multiple projects for the School of the Art Institute of Chicago and renovation of the former Chicago Title & Trust Building, now called the Burnham Center.

A cancer survivor, Mr. Dewalt was a longtime supporter of the City of Hope in Duarte, California, which gave him its Spirit of Life Award. He served on the alumni board of UIC’s architecture school and on the Frank Lloyd Wright Foundation Restoration Committee in Oak Park.

Services will be private.

This content was originally published here.

This content was originally published here.

With Valentine’s day just around the corner, everyone’s focused on coming up with the most meaningful gift for their loved ones. That’s where the tricky part comes in, making the smartest purchase from a plethora of options. Well, look no further! We bring to you some amazingly affordable gift ideas. These products are

This content was originally published here.

This content was originally published here.

E-Filliate, Inc. DeWALT Jobsite Pro Wireless Earphones Class Action Overview:

• Who: E-Filliate, Inc. is facing a class action lawsuit in connection with its DeWALT Jobsite Pro Wireless earphones.
• Why: The earphones can overheat during charging or use and pose a serious burn risk and fire hazard to users.
• Where: The case is pending in California district court.

DeWALT Jobsite Pro Wireless earphones can overheat during charging or use and pose a serious burn risk and fire hazard to users, a new class action lawsuit alleges.

Philip Smith filed the lawsuit against E-Filliate, Inc., which manufactures the earphones, saying that the “unreasonably dangerous” earphones have a design defect that E-Filliate was aware of when he purchased the earphones.

“Mr. Smith’s belief that the earphones were fit for their intended purpose formed the basis of the bargain, and Mr. Smith would not have purchased the Product or would have paid significantly less for the Product had he known that the Product was unfit to perform its intended purpose,” the claim reads. Smith says his earphones began to malfunction shortly after he purchased them, overheating during use.

DeWALT Earphone Users Report Burn Injuries, Fires

In December 2021, the United States Consumer Product Safety Commission (CPSC) issued a recall for around 301,800 units of the earphones due to the issue after E-filliate received 61 reports of the earphones overheating during charging or use, including five reports of fire and four reports of minor burn injuries.

“Consumers should immediately stop using the wireless earphones and contact E-filliate to receive a prepaid shipment label to return the product directly to E-filliate in order to receive a free replacement,” the notice states.

However, Smith says the recall remedy was “grossly insufficient because it in no way compensated consumers for the purchase of a dangerous and defective product.” The recall instead offered an exchange for a replacement.

Smith also says the recall notice was inadequate in notifying consumers of the defect, and it did not provide for statutory damages and other relief owed to consumers.

Rather than submit for a product replacement, Smith contacted DeWALT for information regarding a refund but did not receive any such information, he says.

“Plaintiff suffered economic injury from the Product Defect because he purchased an item that was worth less than what had been represented to him,” the claim reads.

Smith is bringing the lawsuit against E-Filliate, Inc. on behalf of consumers nationwide and is suing for violation of New York General Business Law, breach of implied warranty, violation of the Magnuson-Moss Warranty Act and unjust enrichment.

He seeks certification of the class, damages, interest, restitution and a jury trial.

Do you own a pair of the DeWALT Jobsite Pro Wireless earphones? Let us know in the comments section below!

Smith is represented by Andrew J. Obergfel, Stephen A. Beck and Timothy Fisher of Bursor & Fisher, P.A.

The Burning E-Filliate Earphones Class Action Lawsuit is Smith v. E-Filliate, Inc., Case No. 2:22-at-00251, in the U.S. District Court Eastern District of California.

This content was originally published here.

BLACK+DECKER BPACT12WT Large Spaces Portable Air Conditioner, 12,000 BTU, White

Now is a great time to buy an air conditioner. . . don’t wait until the middle of July, when it’s regular price! Amazon has the BLACK+DECKER BPACT12WT Large Spaces Portable Air Conditioner, 12,000 BTU, White on sale for $291 (reg. $399). This air conditioner unit has amazing reviews. This is the lowest price it’s been on Amazon – it averages $375!

• QUIET & POWERFUL – Our 5,950 BTU DOE (12,000 BTU ASHRAE) compact air conditioner (17.1 x 13.8 x 28.1 in,) will keep you cool and comfortable all summer. An adjustable fan speed cools the air to 65°F at the coolest setting. Sleep mode makes it extra quiet while you rest, Auto Water Evaporation
• PERFECT FOR SMALL ROOMS – This floor-standing portable AC unit provides steady, fast, effective cooling for rooms up to 300 sq. ft. It’s the ideal small air conditioner for dorms, apartments, cabins, campers, offices, bedrooms, or living rooms
• SIMPLE & QUICK TO INSTALL – Just wheel this portable air conditioner into any room with a double hung or sliding window. Attach the included hose (4’ 11”) & window adapter, & plug it in to an outlet! At the end of the season, just unhook & store
• EASY TO USE & CLEAN – The simple remote control & top-mounted LED display with 24-hour timer allow you to precisely control the air temperature. To clean the filter, just slide it out twice a month, rinse it thoroughly under running water, & put it back
• 3-in-1 FUNCTIONALITY – Combines 3 energy efficient functions for all of your cooling & ventilation needs with cool, fan, & dehumidifying modes all in one machine. Bucket-less, self-evaporating operation makes your living space cool, clean and dry

Qualifying orders $25 or more ship FREE and free 2-day shipping with an Amazon Prime membership. Amazon prices can change at anytime.  Check out Amazon’s Daily Deals and our other favorite Amazon deals here. 

As an Amazon Associate I earn from qualifying purchases via my affiliate links in these posts.

Find it here – BLACK+DECKER BPACT12WT Large Spaces Portable Air Conditioner, 12,000 BTU, White

The post Amazon – BLACK+DECKER Large Spaces Portable Air Conditioner – $291 (reg. $399), best price, amazing reviews! appeared first on Queen Bee Today.

This content was originally published here.