Factory Authorized Outlet via eBay has DeWALT 10″ 15A Corded Jobsite Table Saw w/ Rolling Stand (DWE7491RS) on sale for $489. Shipping is free.
Thanks to Community Member HankMoody512 for …
This content was originally published here.
DeWalt unveiled its newest 20V MAX* DEWALT POWERSTACK™ Compact Battery (DCBP034) and Charger Kit (DCBP034C).Now through March 31, 2022 or while supplies last, buy a two-pack of the new, 20V MAX* DEWAL
This content was originally published here.
Was looking for a deal on a Bandsaw for cutting aluminum railings. I found that if you add the 20-Volt MAX XR Premium Lithium-Ion Starter Kit 6.0Ah Battery Pack, 4.0Ah Battery Pack, Charger and Kit Ba …
This content was originally published here.
At first glance, it’s pretty obvious the DeWalt Atomic 20V Max Impact Driver is very different. So how much performance do you have to give up to get such a compact design? We took a deep dive and tested the DCF850 against the 20V Max XR DCF887 to find out!
Out of the gate, the DCF850 sports some familiar specifications. With 1825 in-lbs of torque, 3250 RPM, and 3800 IPM controlled with 3 speeds and a variable speed trigger, the design team dialed the brushless motor in to match the larger DCF887/888.
With the design being so much smaller, we wanted to compare the two side-by-side to see how they do when the rubber hits the road.
The test we ran uses 8-inch RSS screws from GRK Fasteners. We run them into stacked OSB plywood to give us a consistent medium to work with. To make sure it was as fair as possible, both impact drivers started with a freshly charged 5.0Ah battery.
| Atomic 20V Max DCF850 | 20V Max XR DCF887 | |
| Test 1 | 10.28 sec | 9.11 sec |
| Test 2 | 10.22 sec | 9.06 sec |
| Test 3 | 9.28 sec | 9.65 sec |
| Test 4 | 10.14 sec | 10.83 sec |
| Test 5 | 10.69 sec | 9.53 sec |
| Average Time | 10.12 sec | 9.64 sec |
In this test, the Atomic was about a 1/2 second slower on average. Does half a second matter that much?
It’s up to you, of course, but we don’t mind it for the lighter weight and more compact design you get.
Taking over the title of the most compact impact driver, the DCF850 measures just 3.97 inches long. It’s so small, the battery would stick out beyond the collet. DeWalt deals with that by angling the head up slightly, so the battery kicks back a little.
On the weight side, it’s 2.1 lbs. With the 5.0Ah battery we used, the total weight is 3.5 pounds. If you want to go as compact as possible, pair it with a PowerStack battery and the weight is just 2.9 pounds.
In terms of design and specifications, here’s how the DeWalt Atomic DCF850 and XR 887 models compare:
| DeWalt DCF850 | DeWalt DCF887 | |
|---|---|---|
| Motor | Brushless | Brushless |
| Drive | 1/4 in. | 1/4 in. |
| Max Torque | 1825 in-lbs | 1825 in-lbs |
| Impact per Minute | 0-3800 IPM | 0-3800 IPM |
| Speeds (RPM) | 0-1000/2800/3250 | 0-1000/2800/3250 |
| Length | 3.97 in. | 5.3 in. |
| Bare Weight | 2.1 lbs | 2.1 lbs |
| Kit Price | $199 (includes 5.0Ah battery) | $199 (includes 5.0Ah battery) |
DeWalt offers the Atomic 20V Max 1/4 in. Brushless Cordless 3-Speed Impact Driver in a few options. If you’re good on DeWalt batteries, you can pick up the bare tool for $149. The kit option is $199 and includes a 5.0Ah battery, charger, and carry bag.
DeWalt backs the tool with a 3-year warranty, 1-year free service agreement, and 90-day money-back guarantee.
While the specs are the same as the DCF887, the DeWalt Atomic 20V Max impact driver has slightly slower performance in tougher driving tasks. Don’t let that dissuade you, though. The DCF850 is a seriously compact impact driver that still has plenty of speed and muscle to be the only impact driver you need in your tool bag.
The post DeWalt Atomic Compact 20V Max Impact Driver Review DCF850 appeared first on Pro Tool Reviews.
This content was originally published here.
Lithium producers and battery makers have struggled to match production to the soaring demand from electric vehicle makers and other companies that depend on the metal for rechargeable batteries.
Chemicals company Allkem saw spot prices of lithium chemicals reach “new records” following supply deficits due to skyrocketing demand in China, Chief Sales and Marketing Officer Christian Cortes told analysts last month.
“It’s a very, very tight supply market and as result of this we are seeing a very, very rapid increasing pricing,” he said.
Energizer said it plans to raise battery prices after confronting high costs for lithium and other raw materials. The battery maker will also keep an elevated safety stock for the “foreseeable future” as labor challenges and issues sourcing raw materials continue to make supply volatile, President and CEO Mark LaVigne told analysts Feb. 7.
A rapid expansion in industries electrifying their products pushed Sunlight Group Energy Storage Systems, a global producer of industrial batteries, to expand investment in lead recycling methods and is looking at ways to recycle lithium.
“We are investing in new product lines and increasing capacity across our plants in Europe and North America to meet this demand,” Todd M. Sechrist, CEO and President of Sunlight Batteries USA, said in an email.
Stanley Black & Decker is also investing in innovation to add capacity — the company’s venture capital arm contributed to a $5.7 million investment funding round for 3-D lithium ion battery company Prieto Battery in August, according to a press release.
The company also introduced a power stack battery system in November using lithium-ion pouch cells instead of cylindrical cells, which are in higher demand because of their use in automobiles, CEO Jim Loree said during the company’s Q3 earnings call. Innovation projects worth approximately $200 million are also currently in the works.
“We are continuing to invest in innovation, manufacturing, automation, inventory, and our supply chain to meet the strong demand in the near-term and fuel sustainable growth over the medium and long-term,” Loree told analysts this month.
This story was first published in our Procurement Weekly newsletter. Sign up here.
This content was originally published here.
If you’re looking to tackle some carpentry around your house or even dip your toes into woodworking, a good table saw is invaluable.
Table saws are very different from hand saws and miter saws, because rather than being hand-held, they have circular saw blades mounted on arbors that are powered by electric motors. The blades are designed to handle serious woodworking projects, but they can easily tackle more minor cuts. Additionally, table saws are designed for making longer cuts than you might be able to handle precisely with a hand saw.
If you never took wood shop in school, a table saw consists of the circular saw blade, a blade cover, a table and mount to hold the saw in place, a rip fence, anti-kickback claws and gauges for height adjustment. Professionals use cabinet saws and contractor table saws in their shops, but you can opt for something more portable like a job-site table saw, a hybrid table saw or a mini saw.
As one of the most trusted brands in power tools, DeWalt has a wide range of professional-grade saws, including miter saws, reciprocating saws, circular saws and table saws. The brand has been in business since 1924, and its products go through extensive worksite research and testing. They are backed by a 90-day, money-back guarantee, as well as a three-year limited warranty and a one-year free service contract.
Our sister site Don’t Waste Your Money has a team of experts that spends hundreds of hours analyzing, testing and researching products to help consumers make informed purchasing decisions. Here are their top picks for DeWalt table saws.
This impressive DeWalt table saw has a 15-amp motor capable of spinning the blade at 4,800 revolutions per minute and is on wheels, making it easy to roll it to where the work is. Its sturdy rack-and-pinion telescoping fence system is strong enough to saw through large sheets of lumber, and it has a built-in power-loss reset. You’ll also like its compact size and ease of use. Note that its enhanced features mean this saw is priced higher than others that DeWalt makes. Still, it got the top marks from Don’t Waste Your Money’s researchers.
This heavy-duty DeWalt table saw also includes a durable table, rolling stand and extra storage space. Its rack-and-pinion fence rails support even the most difficult jobs. This saw also has a power-loss reset to guard against accidental restarts. Note that there is the risk of deviations unless you use an improvised feed table with this saw.
If you’re looking for a more lightweight table saw that’s still plenty durable, check out this job-site model. It’s perfectly sized to be packed up and transported but still boasts a 15-amp, 5,800-RPM motor for power and efficiency. The sturdy metal cage also keeps it stable while you are sawing. Be aware that this table saw does not come with a wheeled base, making it a little less portable out of the box. In addition, the 8.5-inch size limits the thickness you can safely cut, so this one is likely best for smaller job.
If you’re looking for a great kit that will let you tackle a list of jobs right out of the box, this one packs a 10-inch table saw with a rolling stand and a powerful drill, all from DeWalt. The saw has a 15-amp, 4,800-RPM motor with a 32 1/2-inch rip capacity. It comes with a 20-volt, compact 1/2-inch drill, two 20-volt lithium-ion battery packs, a 20-volt charger and a carrying bag. This table saw even has onboard storage for your other tools.
Safety is critical when using any saw or other power tools, so be sure to look over the instructions and before you get started and handle with care. Wear protective goggles, a respirator, work gloves and hearing protection while working with any table saw. And do not turn your table saw on while any wood is touching the blade.
When making crosscuts, always use your miter gauge, not the rip fence. You should use the rip fence when making rip cuts. Keep the wood completely flat against your table when cutting, and remember to turn the saw off and unplug it when it’s not in use, especially if anyone else uses your woodworking space for any reason.
This content was originally published here.
20V MAX XR Brushless 1/4 in. Impact Driver
Confidence and longevity will be found while using this Dewalt Brushless Motor powered by XR Li-ion batteries
This compact design will fit nicely in small tight work spaces
With its easy to load quarter inch chuck and sleeve will allow up at a 1″ bits giving the user can apply multiple tip options
Multiple speed setting (3), can be used for various applications
Led built in lights will ensure ample visibility in dark spaces
FLEXVOLT 60V MAX Brushless Reciprocating Saw
A familiar 1 – 1/8 inch stroke length will offer the user fast results
0 – 3000 SPM gives the user plenty of options to climax the job at hand
Uncompromised power will be realized without a cumbersome cord to tether you
Led built in lights offer great visibility
Comfort and control will be ensured while grasping the rubber grip
Speed of blade can be quickly controlled via the trigger speed lever
Changing blades is easy and fast as it requires no key
What you’ll get:
Storage Box – DCS300
20V MAX XR Brushless 1/4 in. Impact Driver – DCF887
FLEXVOLT 60V MAX Brushless Reciprocating Saw – DCS388
Battery charger – DCB115
2 / 60V MAX Lithium-Ion Batteries – DCB606
Manual for operation
https://www.costco.com/dewalt-fle…11040.htm
This content was originally published here.
Today
at
05:31 PM
#4
This content was originally published here.
Yesterday
at
03:30 PM
#4
This content was originally published here.
NEW BRITAIN, Conn., Jan. 26, 2022 /PRNewswire/ — Stanley Black & Decker (NYSE: SWK) (the “Company”) today announced that it plans to restate its previously issued consolidated financial statements to correct its accounting with respect to its Equity Units in response to comments received from the Securities and Exchange Commission (the “SEC”).
After giving effect to this change, the Company’s diluted GAAP earnings per share is reduced by $0.31, $0.24, and $0.14 for the fiscal years ended January 2, 2021, December 28, 2019 and December 29, 2018, respectively. Excluding acquisition-related and other charges, the Company’s diluted earnings per share is reduced by $0.36, $0.31 and $0.27 for the fiscal years ended January 2, 2021, December 28, 2019 and December 29, 2018, respectively. This accounting correction was reflected on a prospective basis as previously discussed on Form 8-K and Form 10-Q as filed on November 12, 2021.
The changes will not impact the Company’s historical net earnings and does not affect compliance with the financial covenants contained in the Company’s outstanding debt instruments or compliance with any other agreement of the Company or its subsidiaries. The effects of these changes are detailed in a Current Report on Form 8-K that is also being filed with the SEC today.
This decision was approved by the Company’s Audit Committee made in consultation with management and the Company’s independent registered public accounting firm. The Company plans to restate the financial statements as of January 2, 2021 in an amendment to the 2020 Form 10-K and the unaudited interim financial statements as of April 3, 2021, July 3, 2021, and October 2, 2021 in an amendment to the Q3 2021 Form 10-Q, both to be filed with the SEC.
Investors should no longer rely upon the Company’s previously released financial statements for the time periods cited above. Similarly, related press releases, earnings releases, and investor communications describing the Company’s previously issued financial statements for these periods should no longer be relied upon.
About Stanley Black & Decker:
Stanley Black & Decker, an S&P 500 company, is a leading global diversified industrial with 56,000 employees in more than 60 countries who make the tools, products and solutions to deliver on its Purpose, For Those Who Make The World. The Company operates the world’s largest tools and storage business; and is a global industrial leader of highly engineered solutions within its engineered fastening and infrastructure businesses. Learn more at www.stanleyblackanddecker.com.
Investor Contacts:
Christina Francis
Director, Investor Relations
(860) 438-3470
[email protected]
Debora Raymond
Vice President, Public Relations
[email protected]
(203) 640-8054
SOURCE Stanley Black & Decker
This content was originally published here.
